SKIN REMODELING WITH TWINLIGHT METHOD

It is a unique skin rejuvenation treatment. This remodeling is achieved using two Nd:Yag and Er:Yag Spectro SP laser beams in one session. The procedure consists of four stages: the first two are performed with the Nd:Yag laser (3D Fractionation and T3 Photorejuvenation), while the next two are fractionation using the Er:Yag laser. In this effective way, you can reduce wrinkles while firming and improving the tension and tone of the skin.

During skin aging, collagen fibers change their structure, which is manifested by loss of elasticity, laxity, appearance of excess skin, wrinkles, and changes in facial oval.

This is caused by a reduction in the number of collagen fibers, changes in their structure (collagen is stretched and twisted), as well as a reduction in active fibroblasts (connective tissue cells responsible for the production of elastin and collagen fibers).

To make the effects of aging less "painful" for patients, it is necessary to constantly take care of and stimulate the reconstruction processes in the dermis.

In our center, we use a Nd:Yag neodymium-yag laser from Fotona Spectro SP with a light wavelength of 1064nm and an Er:Yag erbium-yag laser with a wavelength of 2940nm for the remodeling treatment. Nd:Yag is the deepest penetrating laser beam available on global markets, thanks to which it can destroy large-diameter vessels hidden deep under the skin. At the same time, thanks to homogeneous penetration, it has a very wide range of applications and minimizes the risk of tissue damage. Thanks to the highest power and advanced safety systems, the Fotona Spectro SP laser is the fastest and safest laser on the market.

We also perform this innovative Twinlight laser remodeling treatment using Er:Yag laser from Fotona Spectro SP with a light wavelength of 2940nm. Fotony erbium lasers use this wavelength for minimally ablative, quick treatments that remove microelements of damaged tissue, resulting in a profound thermal effect. Classic non-ablative fractional treatments leave thousands of trace elements in the skin, consisting of hot, dead remnants of the treated tissue. Excess heat from this tissue becomes trapped in the skin, causing unnecessary pain and discomfort. Fotona's fractionating head instantly removes hot tissue debris from the skin, reducing pain and speeding recovery. Clean microchannels have the same thermal impact zone as microchannels after non-ablative fractional treatment, but do not cause irritation, swelling or pain. After treatment with the Fractional Photon head, the microchannels close and heal much faster than in the case of classic non-ablative fractional techniques. The Fotona Spectro SP Er:YAG laser achieves maximum effects with a minimum depth of laser beam penetration. Spectro SP for fast, cold ablation in XLP (extended pulse) mode provides the deepest thermal effects. This laser can ablate the epidermis or skin micron by micron, ensuring unrivaled precision and treatment control, short recovery periods and higher patient comfort and satisfaction. At the same time, Fotona Spectro SP, thanks to the highest power and advanced safety systems, is the fastest and safest laser on the market.

What is unique about skin remodeling using the TWINLIGHT method?

Only one treatment is performed, during which a Nd:Yaga and Er:Yaga laser beam is used. After 7 days after the procedure, a good appearance is achieved.

FULL SKIN RESURFACING USING Nd:Yag and Er:Yag LASER

How many treatments are needed?

Only one session is performed.

Immediately after the procedure:

Immediately after the treatment, the skin is moisturized with a cooled thermal water spray. Then, cooling is carried out with cooling packs (e.g. cold-pack) for 5-10 minutes. The patient's feelings immediately after the procedure are similar to those after a burn. During the patient's recovery, the following symptoms are observed: erythema, dryness, moderate hypersensitivity, periocular swelling, superficial micro-scabs and moderate itching. These symptoms usually disappear after 7-10 days. Patients are provided with preventive antibacterial and antiviral treatment.

Skin remodeling effects:

A unique treatment allowing for radical skin rejuvenation. A new and extremely effective way of reducing wrinkles while firming and improving tension.

The effect is more smooth, taut and brightened skin with a healthy glow.

Contraindications to laser therapy:

• Pregnancy
• Diabetes
• Pacemaker
• Bloathing disorders
• Epilepsy
• Tan (too much accumulated melanin absorbs a large dose of energy, which may cause skin discoloration). You should not sunbathe (sun, solarium) for 4 weeks before and 4 weeks after the procedure
• Tendency to discoloration
• Active viral or bacterial lesions on the skin
• Use of certain medications:
  
  
  • Medicines that reduce blood clotting; anticoagulants, e.g. aspirin
  • Steroids
  • Photosensitizing drugs: some antibiotics, e.g. tetracycline, doxycycline, vitamin A derivatives, some cardiological drugs and others, e.g. furagine
  • Use of some herbs: marigold, St. John's wort, horsetail
  • Using creams with retinol
  • Peels (stop performing about a week before the planned procedure)

Recommendations for the patient before laser skin remodeling treatment:

• Do not sunbathe (sun, solarium) for 4 weeks before the procedure
• Do not use exfoliating treatments (peeling) for a week before the treatment
• If you use drugs: anticoagulants, steroids, photosensitizing drugs, they should be discontinued (if possible) 7 days before the procedure, and then they can be used again 14 days after the procedure
• Do not drink alcohol on the day of the procedure
• The treatment is performed on clean skin (cosmetics should be washed off before the treatment)

Recommendations for the patient after laser skin remodeling:

• It is not recommended to use a hot bath or sauna 14 days after the treatment
• It is not recommended to sunbathe (sun, solarium) for 4 weeks after the treatment
• For facial treatments, use creams with a filter of at least SPF 30 for 4 weeks after the treatment
• Cosmetics can be used immediately after the treatment
• You should come for a follow-up visit after the procedure

Why skin remodeling with the Twinlight Nd:Yag and Er:YAG Laser FOTONA SPECTRO SP?

Fotona neodymium-jag Nd:YAG and Er:YAG lasers - are modern devices enabling a number of procedures in the field of surgery, dermatology and aesthetic medicine. The spectrum of applications is very wide, ranging from laser epilation, through acne treatment, photorejuvenation, to the treatment of skin cancer, removal of varicose veins and laser lipolysis procedures. The Spectro SP laser achieves maximum effects with a minimum depth of laser beam penetration. This laser is the ideal tool for fast, cold ablation. Photona's Variable Square Pulse (VSP) technology adjusts laser parameters to suit the treatment, ensuring ease of use. Square pulses can treat a variety of indications with unparalleled efficiency, without overheating adjacent tissues, thus ensuring patient comfort. Additionally, built-in pulse feedback control (EFC) technology ensures that the laser output energy is always consistent with the parameters set for the patient, thus ensuring the highest level of safety and reliability of the system.

The average power in quasi-continuous pulse mode is 30 WAT. The competition doesn't even come close to this result. Thanks to this, treatments are performed much faster and more effective. In the hands of a doctor, this laser is an almost perfect tool.

Effective remodeling for all skin types:

The Spectro SP laser is the most powerful combination of an Nd:YAG and Er:YAG laser. It provides the widest range of ablative and non-ablative treatments that a single laser system can offer. Nd:YAG Photons laser, which is part of this laser, with long pulses is characterized by homogeneous penetration and low absorption by tissue chromophores. These two advantages allow the Nd:YAG laser to reach deeper structures without damaging the epidermis, regardless of skin type.

Innovation of the Nd:YAG and Er:YAG lasers Fotona Spectro SP:

This laser is equipped with a number of innovative solutions such as EFC (impulse feedback control) - a system that provides a previously unavailable level of control over the energy of the laser beam pulse. Thanks to each time the device is calibrated the laser always delivers a beam with precisely defined parameters, which increases the safety and effectiveness of the treatment. Another innovative feature of Fotona Spectro SP lasers is the VSP system (variable square pulse – protected solution patent) allowing the generation of a pulse with given parameters with a negligibly short rise and fall time of the pulse energy. This increases the efficiency of the laser beam and simultaneously improves the effectiveness and speed of treatment compared to other devices.

Thanks to the highest power and advanced safety system, the Fotona Spectro SP laser is the fastest and safest laser on the market.

The security of the Fotona Spectro SP system is:

• EFC (impulse feedback control)

  Thanks to this system, we avoid a decrease in laser power during the treatment, which could lead to weaker or incomplete results. We also do not have to worry about energy surges that may cause tissue damage.

• VSP (variable square pulse)

  Unlike other systems, where there is a sudden jump in energy and then a slow decrease, in the Fotona Spectro SP system the pulse energy distribution is even. This protects us against overheating and tissue burns. It improves dramatically effectiveness and safety of treatments.

The effectiveness of the Fotona Spectro SP system is:

The Fotona Spectro SP laser, thanks to the combination of two laser beam wavelengths: Nd:YAG - 1064nm and Er:YAG - 2940nm, offers the widest range of treatment services among all those available on the Polish market. The neodymium-Jag laser with a wavelength of 1064 nm is the deepest penetrating laser beam available on the market, thanks to which it can destroy large-diameter vessels hidden deep under the skin. At the same time, thanks to homogeneous penetration, it has a very wide range of applications and minimizes the risk of tissue damage. High power in quasi-continuous pulse mode is 30 Watts. The competition doesn't even come close to Siudo's result. Using the 2940nm wave, for minimally ablative quick treatments that remove microelements of damaged tissue, resulting in a deep thermal effect. Classic non-ablative fractional treatments leave thousands of trace elements in the skin, consisting of hot, dead remnants of the treated tissue. Excess heat from this tissue becomes trapped in the skin, causing unnecessary pain and discomfort. The Fotona head immediately removes hot tissue residues from the skin, reducing pain and accelerating recovery. Clean microchannels have the same thermal impact zone as microchannels after non-ablative fractional treatment, but do not cause irritation, swelling or pain. After treatment with the Fractional Photon head, the microchannels close and heal much faster than in the case of classic non-ablative fractional techniques. Thanks to this, treatments performed with the Fotona Spectro SP system are much faster and more effective. With this laser system, all patient needs can be met, achieving excellent clinical results and unprecedented gentleness.