3D FRACTIONATION – deep skin lifting
3D fractionation is a unique treatment allowing radical rejuvenation of the dermis. This is an innovative and extremely effective way of reducing wrinkles while firming and improving skin tension.
New revolutionary method PHOTONS 3D fractionation creates thermal micro-damages deep in the skin. The resulting irritations consequently stimulate collagen and collagen fibers. Compared to the methods of classic ablative and non-ablative fractionation, these microdamages are created much deeper, so the effect we achieve will be stronger. It is the first non-ablative laser method for strong skin tightening - for skin lifting. Unlike other laser rejuvenation treatments, this gentle, non-ablative anti-aging treatment delivers results with no recovery time.
During skin aging, collagen fibers change their structure, which is manifested by loss of elasticity, laxity, appearance of excess skin, wrinkles, and changes in facial oval.
This is caused by a reduction in the number of collagen fibers, changes in their structure (collagen is stretched and twisted), as well as a reduction in active fibroblasts (connective tissue cells responsible for the production of elastin and collagen fibers).
To make the effects of aging less "painful" for patients, it is necessary to constantly take care of and stimulate the reconstruction processes in the dermis.
In our center, we use a Nd:Yag neodymium-jag laser for the 3D Fractionation treatment by Fotona Spectro SP with a light wavelength of 1064nm. It is the deepest penetrating laser beam available on global markets, thanks to which it can destroy large diameter vessels deeply hidden under the skin. At the same time, thanks to homogeneous penetration, it has a very wide range of applications and minimizes the risk of tissue damage. Thanks to the highest power and advanced safety systems, the Fotona Spectro SP laser is the fastest and safest laser on the market.
What is unique about the 3D fractionation treatment
Fractionation - FRAC3®
The new revolutionary Fotona Frac3® method (3D fractionation) creates thermal micro-damages deep in the skin. The resulting irritations consequently stimulate collagen and collagen fibers. Compared to the methods of classic ablative and non-ablative fractionation, these microdamages are created much deeper, so the effect we achieve will be stronger. This is the first non-ablative laser method for firm skin tightening.
Who is this treatment for?
This treatment is intended for mature people who want to tighten and firm their skin. Using this innovative 3D Fractionation treatment, wrinkles can be reduced or eliminated.
As a result, the skin will become smoother and more delicate.
How many treatments are needed?
The number of treatments a patient should undergo in order to obtain the most desired effects is from 3 to 6 treatments at 2-4 week intervals.
It is important to discuss the regularity of visits with the patient, as subsequent treatments will keep the collagen in a positive growth phase to maintain and enhance the results.
3D fractionation effects:
A unique treatment allowing for radical skin rejuvenation. A new and extremely effective way of reducing wrinkles while firming and improving skin tension.
The laser penetrates deep into the dermis and causes:
- Wrinkle reduction
- Improves skin tension
- Firms the skin
The effect is more smooth, taut and brightened skin with a healthy glow.
Wrinkles will continue to fade for 12 months after initial treatment as the natural rejuvenation process continues.
Contraindications to laser therapy:
- Pregnancy
- Diabetes
- Pacemaker
- Bloathing disorders
- Epilepsy
- Tan (too much accumulated melanin absorbs a large dose of energy, which may cause skin discoloration). You should not sunbathe (sun, solarium) for 4 weeks before and 4 weeks after the procedure
- Tendency to discoloration
- Active viral or bacterial lesions on the skin
- Use of certain medications:
- Medicines that reduce blood clotting; anticoagulants, e.g. aspirin
- Steroids
- Photosensitizing drugs: some antibiotics, e.g. tetracycline, doxycycline, vitamin A derivatives, some cardiological drugs and others, e.g. furagine
- Use of some herbs: marigold, St. John's wort
- Using creams with retinol
Recommendations for the patient before the 3D fractionation procedure:
- Recommendations for the patient before the 3D fractionation procedure:
- Do not use exfoliating treatments (peeling) for a week before the treatment
- If you use drugs: anticoagulants, steroids, photosensitizing drugs, they should be discontinued (if possible) 7 days before the procedure, and then they can be used again 14 days after the procedure
- Do not drink alcohol on the day of the procedure
- The treatment is performed on clean skin (cosmetics should be washed off before the treatment)
Recommendations for the patient after 3D fractionation treatment:
- It is not recommended to use a hot bath or sauna 14 days after the treatment
- It is not recommended to sunbathe (sun, solarium) for 4 weeks after the treatment
- For facial treatments, use creams with a filter of at least SPF 30 for 4 weeks after the treatment
- Cosmetics can be used immediately after the treatment
- You should come for a follow-up visit after the procedure
Why 3D FRACTIONATION with the Nd:YAG Laser FOTONA SPECTRO SP?
Fotona neodymium-jag Nd:YAG and Er:YAG lasers - are modern devices enabling a number of procedures in the field of surgery, dermatology and aesthetic medicine. The spectrum of applications is very wide, ranging from laser epilation, through acne treatment, photorejuvenation, to the treatment of skin cancer, removal of varicose veins and laser lipolysis procedures. The Spectro SP laser achieves maximum effects with a minimum depth of laser beam penetration. This laser is the ideal tool for fast, cold ablation.
The average power in quasi-continuous pulse mode is 30 WAT. The competition doesn't even come close to this result. Thanks to this, treatments are performed much faster and more effective. In the hands of a doctor, this laser is an almost perfect tool.
Effective fractionation of all skin types:
Nd:YAG Laser Photons with long pulses is characterized by homogeneous penetration and low absorption by tissue chromophores. These two advantages allow the Nd:YAG laser to reach deeper structures without damaging the epidermis, regardless of skin type.
Innovation of the Nd:YAG and Er:YAG lasers Fotona Spectro SP:
This laser is equipped with a number of innovative solutions such as EFC (impulse feedback control) - a system that provides a previously unavailable level of control over the energy of the laser beam pulse. Thanks to each time the device is calibrated the laser always delivers a beam with precisely defined parameters, which increases the safety and effectiveness of the treatment. Another innovative feature of Fotona Spectro SP lasers is the VSP system (variable square pulse – protected solution patent) allowing the generation of a pulse with given parameters with a negligibly short rise and fall time of the pulse energy. This increases the efficiency of the laser beam and simultaneously improves the effectiveness and speed of treatment compared to other devices.
Thanks to the highest power and advanced safety system, the Fotona Spectro SP laser is the fastest and safest laser on the market.
The security of the Fotona Spectro SP system is:
- EFC (impulse feedback control)
Thanks to this system, we avoid a decrease in laser power during the treatment, which could lead to weaker or incomplete results. We also do not have to worry about energy surges that may cause tissue damage.
- VSP (variable square pulse)
Unlike other systems, where there is a sudden jump in energy and then a slow decrease, in the Fotona Spectro SP system the pulse energy distribution is even. This protects us against overheating and tissue burns. It improves dramatically effectiveness and safety of treatments.
The effectiveness of the Fotona Spectro SP system is:
The neodymium-Jag laser with a wavelength of 1064 nm is the deepest penetrating laser beam available on the market, thanks to which it can destroy large-diameter vessels hidden deep under the skin. At the same time, thanks to its homogeneous penetration, it has a very wide range spectrum of applications and minimizes the risk of tissue damage. High power in quasi-continuous pulse mode is 30 Watts. The competition doesn't even come close to Siudo's result. Thanks to this, treatments performed with the Fotona Spectro SP system are much faster and more effective. With this laser system, all patient needs can be met, achieving excellent clinical results and unprecedented gentleness.